air core inductor crossover coil

Custom Air Core Inductor Crossover Coil Solutions ho tsoa ho Moetsi ea ka Sehloohong

Naheng o ipabola ka ho rala le ho hlahisoeng ha li-coil core inductor crossover coil, ho netefatsa ts'ebetso e phahameng le ho ts'epahala. Ka litharollo tse hlophisitsoeng bakeng sa lits'ebetso tse fapaneng, re fana ka likarolo tse entsoeng ka nepo tse fihlelang litlhoko tsa hau tse ikhethileng.

S3 Series Square Shape Air Core Inductors

2024-02-23

1.Litekanyetso tsa inductance ho tloha 5.5 nH ho ea ho 27.3 nH

2.Sebopeho se setle sa boleng - ho fihla ho 130.

3.High self-resonant frequency.

4.Ultra-miniature size, hight currents ho fihlela ho 4.4 Amps.

5.Flat top le tlase bakeng sa khetho e tšepahalang le sebaka se nang le botsitso ba mochini

6.Boleng bohle bo fumaneha ka 2%, 5% mamello.

7. Lieta tsa solder tse entsoeng ka silevera li etsa bonnete ba hore li-solder tse ka tšeptjoang.

8.Thepa ea lihlahisoa ke terata ea koporo ea enamelled.

9. Sephutheloana sa teipi ea Carrier

lintlha tsa pono

S5 RF Surface Mount Inductor Coils

2024-02-21

1. Inductance ho tloha 270 nH ho ea 500 nH.

2. Ntho e ntle ea boleng - ho fihla ho 130.

3. Sebaka se ka holimo se bataletseng bakeng sa pickup e tšepahalang.

4. Litekanyetso tsohle li na le mamello ea 2% le 5%.

5. Thepa ea lihlahisoa ke terata ea koporo ea enamelled

6. Packaging ke carrier theipi le reel.

lintlha tsa pono

Spring Type Hollow Inductors bakeng sa Base Station Filters-sehlahisoa

Li-Inductors tsa Mofuta oa Selemo bakeng sa Lisefe tsa Base Station

2024-01-29

1. E ka sebelisa bonyane 0.1mm terata bophara ba terata kapa ka holimo bakeng sa tlhahiso ea matsoelintsoeke

2. E ka hlahisa sebopeho leha e le sefe seo u se qapileng, empa u lokela ho fana ka litšoantšo tsa litekanyo le litekanyetso tsa sampole;

3. E ka fana ka terata ea koporo ea enamelled, terata ea aluminium enamelled, mohala o mofubelu oa koporo joalo-joalo.

4. Ho ebola, ho penta le ho bopa ho ka phethoa ka nako e le ’ngoe, ’me ho qoelisoa ka thini ka mekhahlelo e mengata hoa khoneha;

5. Ho mamellana ka thata, ho tsitsa ho ka tšeptjoang;

6. E khona ho etsa palo ea li-turning le bophara bo ka hare ba coil eo u e qapileng;

lintlha tsa pono

High Power Flat Coils bakeng sa New Energy Applications-sehlahisoa

Li-Coils tsa Phatlalatso tse Matla a Phahameng bakeng sa Lisebelisoa tse Ncha tsa Matla

2024-01-29

1. Botenya ba terata: 0.08-4.0mm kapa ka holimo, bophara ba terata: 0.10-15mm.

2. Sebopeho sa lesoba: chitja, oval, triangular, quadrilateral, pentagonal, hexagonal joalo-joalo.

3. Thepa ke terata ea koporo e nang le mocheso oa likhato tse 220.

4. Lipheletso tsa terata li ka ebolloa le ho phutheloa ka thini le ho sebetsoa;

5. Lipheletso tsa terata li ka phunyeletsoa le ho bokelloa ka likarolo;

6. Enamel peeping mokhoa: ho itšeha kapa laser hlobolisa;

lintlha tsa pono

Tlhahiso ea mochini oa ho loha ka litheipi

Tailored Customization for Air Core Inductor Crossover Coil Projects

Likhoele tse tloahelehileng tsa moea tse inductor crossover li ntlafatsa ts'ebetso le ho netefatsa ho hokahana ka mokhoa o se nang moeli lits'ebetsong tsa hau.

Naheng ke molekane oa hau eo u mo tšepang bakeng sa phetisetso ea li-coil coil inductor crossover, ea fanang ka:

Meetso e ikhethileng ea li-coil bakeng sa lits'ebetso tsa molumo le matšoao.

Mefuta e fapaneng ea libopeho, ho kenyelletsa le chitja, sekwere, le elliptical.

Likhetho tse ikhethileng tsa thepa bakeng sa ho tšoarella ho matlafalitsoeng le conductivity.

Prototyping e potlakileng le phano e potlakileng bakeng sa linako tse thata tsa projeke.

LIEKETSENG EKETSEHILENG

20 ⁺

Lilemo tsa boiphihlelo ba indasteri
3000 ⁺

Limithara tse lisekoere tsa sebaka sa tlhahiso
500 ⁺

Bareki ba khotsofetseng lefatšeng ka bophara
60 ⁺

milione+ Selemo le selemo

Comprehensive Air Core Inductor Crossover Coil Manufacturing Services

Ho tloha ho moralo ho isa tlhahisong e felletseng, Naheng e fana ka tharollo ea ho qetela bakeng sa li-coil core inductor crossover coil. E netefalitsoe ho litekanyetso tsa ISO 9001:2008 le IATF 16949:2016, re fana ka boleng bo ikhethang le ts'ebetso. Litšebeletso tsa rona tsa tlhahiso li kenyelletsa:

●Meralo e ikhethileng e etselitsoeng lits'ebetso tse fapaneng.

● Likhetho tsa thepa tse fihlelang litlhoko tse ikhethang tsa merero ea hau.

● Tlhahiso e tšepahalang, e potlakileng le ho romelloa ho boloka merero ea hau e ntse e tsoela pele.

Fumana Quote Ikopanye le Setsebi

Ke eng e Ncha ho NAHENG

Tlhahiso e nepahetseng bakeng sa Likhoele tsa Crossover tsa Air Core Inductor

Mekhoa ea rona ea tlhahiso e tsoetseng pele e netefatsa boleng ba boemo bo holimo le ho nepahala bakeng sa coil e 'ngoe le e 'ngoe ea moea oa moea oa inductor crossover. Re sebelisa mekhoa e joalo ka mokhoa o nepahetseng oa ho koala le ho etsa sebopeho, re fana ka li-coil tse nang le ts'ebetso e ntle haholo:

● Libopeho tsa lesoba le ka hare tseo u ka li khethang: selikalikoe, lisekoere, elliptical, le tse ling.

● Ho nepahala ho phahameng ka ho mamellana ka hare ho 2%.

● Lipotoloho tse potlakileng tsa tlhahiso: SMD air core inductor crossover coils e romelloa ka hare ho letsatsi la 1.

Baenjineri ba rona ba nang le boiphihlelo le meaho ea sejoale-joale ba fana ka litharollo tse tšepahalang esita le bakeng sa meralo e rarahaneng ea li-coil tsa crossover.

Ithute haholoanyane

Ke eng e Ncha ho NAHENG

Phatlalatso e Phahameng ea Phatlalatso ea Air Core Inductor Crossover Coil Production

Naheng e kopanya theknoloji e tsoetseng pele le boqapi ba litsebi ho etsa li-coil core inductor crossover coil ka bokhabane bo phahameng ka ho fetesisa. Re fihlela litlhoko tse fapaneng tsa projeke ka:

● Taolo e ikhethang ea mamello, ho fihla ho 0.001 inches.

● Mekhoa e tsoetseng pele ea ho etsa matsoelintsoeke le sebōpeho sa tloaelo.

●Standard air core inductor crossover coil tse teng bakeng sa ho romelloa ka hare ho letsatsi le le leng.

Mehala ea rona ea tlhahiso ea matla a holimo e netefatsa hore ho tsamaisoa ka nako ntle le ho sekisetsa boleng.

Ithute haholoanyane

0102

Lisebelisoa tse Tsoetseng Pele tsa Tlhahiso ea Air Core Inductor Crossover Coil

Mehaho ea morao-rao ea Naheng e na le lisebelisoa tsa ho sebetsana le litlhoko tse rarahaneng tsa tlhahiso ea li-coil tsa air core inductor crossover. Matla a rona a kenyelletsa:

● Thepa e ikemetseng e fokotsang liphoso le ho eketsa bokhoni.

● Mamello e thata (ho fihla ho 0.01mm) bakeng sa tlhahiso e nepahetseng.

●Litšebelisano tse matla ho pholletsa le China bakeng sa ho ntlafatsa maemo a tlhahiso.

Hore na o hloka li-batch tse nyane kapa tlhahiso e kholo, re fana ka likarolo tse tšepahalang le tse sebetsang hantle tse lumellanang hantle le lipheo tsa projeke ea hau.

bala haholoanyane

Molekane oa Hao eo U Mo tšepang oa Air Core Inductor Crossover Coils

010203

Naheng, re etelletsa katleho ea bareki pele ka ho fana ka tataiso ea litsebi le ts'ehetso e inehetseng bakeng sa litlhoko tsa hau tsa coil core inductor crossover coil. Ho tloha mohopolong ho isa ho phano ea ho qetela, sehlopha sa rona se netefatsa hore sehlahisoa se seng le se seng se kopana le litlhaloso tsa hau mme se feta seo u se lebelletseng.

inductor coil bakeng sa Liindasteri tse sa tšoaneng

Lisebelisoa tsa Marang-rang

likoloi tse ncha tsa matla

Lisebelisoa tsa photovoltaic

sesebelisoa sa puisano

Aviation Satellite

Thepa ea elektronike

sebapadiswa sa elektroniki

Lisebelisoa tsa Bongaka

Ke Hobane'ng ha U Re Khetha

01/

Li-inductors tsa boleng bo holimo

Fumana ho nepahala ho ke keng ha bapisoa ho inductor ka 'ngoe eo re e hlahisang. Mekhoa ea rona e tsoetseng pele ea tlhahiso e netefatsa hore likarolo li khomarela mamello e tiileng, e tiileng joalo ka ± 0.01mm, e bakang kopanyo e se nang moeli le bokhabane ba ts'ebetso.

02/

Nako ea ho etella pele ka potlako

Potlakisa potoloho ea hau ea tlhahiso ka Dongguan Naheng Electronics Technology. Mehala ea rona ea tlhahiso e sebetsang hantle le lisebelisoa tsa morao-rao li tiisa nako ea phetoho e potlakileng, e thusa khoebo ea hau ho boloka lebelo le ho fihlela linako tsa bohlokoa.

03/

Tšehetso ea Boenjiniere

Kae kapa kae le neng kapa neng ha u hloka tšehetso, tsamaisa merero ea hau ea moea oa coil inductor ka kholiseho. Litsebi tsa rona tse nang le boiphihlelo li fana ka tataiso e nang le temohisiso mohatong o mong le o mong, ho holisa ntlafatso ea moralo le boleng ba tlhahiso.

Moetsi oa li-coil tsa tloaelo: Mona ho Thusa

Khamphaning ea rona, re ikemiselitse ho fa bareki ba rona boiphihlelo bo ikhethang ba litšebeletso. Re lula re etelletsa pele khotsofalo ea bareki 'me re lula re loanela ho ntlafatsa maemo a litšebeletso tsa rona.

Moetsi

Re fetile setifikeiti sa ISO90001, re na le sistimi e thata ea taolo ea boleng, 'me re na le lilemo tse 13 tsa boiphihlelo ba tlhahiso. Boiphihlelo ba rona bo ruileng bo ka fihlela litlhoko tse fapaneng tse ikhethileng tsa bareki. Theknoloji ea rona e etella pele, lisebelisoa li nepahetse haholo, 'me boleng ba litsebi ba basebetsi ba rona bo ntle haholo. Bokhoni ba rona ba tlhahiso ea selemo le selemo bo ka fihlela li-coil tsa inductor tse fetang limilione tse 60, ho netefatsa hore lihlahisoa tsa hau li ka tlisoa ka nako.

Bahoebi

Lihlahisoa tse ling tse tloaelehileng li teng, taolo e ntle ea litšenyehelo e tiisa hore u na le phaello e lekaneng, puisano e thellang

Bahlodisani

Re ka hlahisa lihlahisoa tse ling tseo ho leng thata hore lithaka tsa rona li li phethe, haholo-holo tse nang le litlhoko tse thata tsa boholo, libopeho tse rarahaneng, le li-diameter tse nyane tsa terata.

FAQs

A na U ka Theha Inductor ea ka ea Coil ho tsoa ho Faele ea Litšoantšo Kapa Tlhaloso e Bonolo?

Bakeng sa inductor e bonolo haholo ea li-coil, ho ka ba hantle haeba litekanyo tsa mantlha le litlhaloso li fanoe. Empa ka tloaelo re hloka ho fumana setšoantšo sa 2D se nang le litekanyo le mamello kapa setšoantšo sa karolo ea 3D, haeba u se na karolo ea setšoantšo. O ka re romella mohlala ho o kopitsa.

Nka Fumana Qotsulo Joang ho Uena?

U ka re siela molaetsa, 'me re tla araba molaetsa o mong le o mong ka nako. Kapa u ka romella lengolo-tsoibila ho ed@smdcoil.com kapa letsetsa thekiso ea rona ka Tel: 86-769-87199105/Mob: 86-13717183025. Lipuisano tsa inthaneteng tsa WhatsApp le Skype lia fumaneha.

A na Nka Fumana lisampole Pele ho Odara?

Ehlile ho joalo. Hangata lisampole tsa rona tse tloaelehileng ha li lefelloe haeba re na le setoko.

Bakeng sa lisampole tse entsoeng ka tloaelo, re tla qotsa litšenyehelo tsa motheo tsa sampole.

O na le Bonyane Bonyane Bongata ba Odara?

Ha re na MOQ, palo efe kapa efe ea odara e tla sebetsoa ka mokhoa o bonolo. Empa lithapo tse ling tse khethehileng tsa enamel li tla ba le MOQ, ho ipapisitse le litlhaloso tsa terata le setoko ho bafani ba rona ba terata.

Kakaretso ea Nako ea Ketapele ke Efe?

Bakeng sa odara e tloaelehileng ea lisampole, nako ea ho etella pele ke matsatsi a 3.

Bakeng sa odara ea lisampole tse ikhethileng, nako ea ho etella pele ke libeke tse 1-2.

Bakeng sa taelo ea tlhahiso ea bongata, nako ea ho etella pele ke 2weeks kapa ho netefatsoa ho latela bongata ba odara.

A na u ka fana ka litokomane tse amehang?

Ee, re ka fana ka litokomane tse ngata ho kenyeletsoa Litifikeiti tsa Analysis / Conformance mohlala ROHS le REACH, tlaleho ea ho lekanya le litokomane tse ling tsa thomello e hlokahalang.

Ho thoe'ng ka litšenyehelo tsa ho romella?

Litsenyehelo tsa ho romela thepa li itšetlehile ka tsela eo u khethang ho tsamaisa thepa ka eona. Express/Ka moea hangata ke eona e potlakileng haholo empa hape e turu haholo. Ka thepa ea leoatleng ke tharollo e molemohali bakeng sa taelo e kholo. litefiso tsa thepa li tla qotsoa ka mor'a hore odara e behoe.

A na u ka hlophisa ketelo ea feme?

Bareki ba amohelehile ho etela fektheri ea rona, re tla fana ka pehelo ea hotele le ho nka tšebeletso.

Litaba

Tataiso ea Winding Coil bakeng sa Ba qalang: Mekhoa le Lisebelisoa

Li-coil windings ke lintlha tsa bohlokoa ho lisebelisoa tse ngata tsa elektroniki ho fetolela matla a motlakase ho matla a khoheli kapa ka lehlakoreng le leng. Sena ke sa bohlokoa ts'ebetsong ea li-motor, li-transformer, le li-inductors, moo likhoele tsa terata li phunyeletsoang ho potoloha bohareng kapa moeeng ho hlahisa matla a khoheli ha motlakase o feta ho ona. Ho sebetsa hantle ha khoele e tsoelipanang ho susumetsoa ke lintlha tse ngata, joalo ka mofuta oa terata e sebelisitsoeng, palo ea ho phethoha ha khoele, kapa lisebelisoa tsa mantlha. Ho ithuta lintlha tsena tsa mantlha ho bohlokoa ho ba lakatsang ho phehella boenjiniere ba elektroniki kapa boenjineri ba motlakase, kaha ke motheo oa ho aha litsebo le tsebo e tsoetseng pele haholoanyane.

09 30 2025

Spring Inductors Guide: Mesebetsi, Melemo & Likopo

Li-inductors tsa selemo, likarolo tsa khale tsa elektroniki, li tsoteha ka lebaka la moralo oa tsona o mocha le mehopolo ea ts'ebetso. Li-inductors tsa selemo li feto-fetoha haholo ka sebopeho ha li bapisoa le li-inductors tse tloaelehileng, tse thata kahong 'me li ke ke tsa mamella khatello ea' mele. Moralo ona o khethehileng o ba tlisetsa melemo e hlakileng 'me o ba etsa hore ba sebetse ka ho khetheha tikolohong e nang le li-vibrations, makala kapa meroalo e meng eo li-inductors tse tloaelehileng li ka senyehang ka eona. Matla a bona a kopantsoeng le ho feto-fetoha ha maemo lits'ebetsong, ho tloha ho lisebelisoa tsa elektronike tsa bareki libakeng tse thata bakeng sa tšebeliso ea letsatsi le letsatsi ho ea ho lisebelisoa tse inehetseng tse sebelisoang sebakeng sa lifofane le likoloi tsa likoloi tse nang le tlhokahalo e kholo ka ho fetisisa ea mahlahahlaha li bonahala ka har'a mefuta ea mehaho, e koahetsoeng tlhahlobong ea hona joale.

09 30 2025

Tataiso ea Likhoele tsa SMD Inductor: Metheo, Tšebeliso le Litlhaloso tsa Bohlokoa

Li-coil tsa Inductor ke likarolo tsa bohlokoa ho lisebelisoa tsa elektroniki tsa sejoale-joale, tse fanang ka polokelo e nepahetseng ea matla le ho sefa lipotolohong. Ho fapana le bo-motsoala ba bona, li-inductors tsa SMD li etsoa hore li rekisoe ka kotloloho ho PCB, e ke keng ea boloka sebaka sa bohlokoa sa boto feela empa hape e khothaletsa meralo e sebetsang ea potoloho. Lintho tsena li bohlokoa haholo ho tsitsiseng phepelo ea motlakase, ho hatella lerata la potoloho, le ho laola tšebetso ea mats'oao. Tsoelo-pele ea theknoloji ea SMD e boletse hore li-coil tsa inductor li ka ba tse nyane 'me tsa nka li-inductors tse tšoanang kapa ka linako tse ling tse kholoanyane ho tse khōloanyane, tse tloaelehileng.

09 29 2025

Tataiso ea ho Reka ea SMD Inductor: Lintlha tse ka Holimo le Malebela a Khetho

SMD inductor e fetohile karolo ea bohlokoa lefats'eng la liindasteri tsa elektroniki le tsa motlakase ho lumellana le boholo ba lisebelisoa. Li-inductors tsena li etselitsoe ho kenngoa ka kotloloho holim'a liboto tsa potoloho tse hatisitsoeng (PCBs) mme ha se feela hore ke moralo o tlase oa ho thusa ho fokotsa lits'ebetso tsa elektroniki, empa hape le ho nolofatsa mehato ea kopano e ikemetseng, e lebisang ho theko e tlase le nako e khuts'oane ea ho ea mmarakeng. Ho ba haufi ha likarolo tsena ha theknoloji e le sieo, ho matlafatsa moralo le bokhoni ba ho kopanya, kahoo e ba ntho ea bohlokoa tlhahisong ea lifono tse bohlale, likhomphutha tsa libuka le lisebelisoa tse ling tsa elektroniki.

09 30 2025

Leka NAHENG Hona Joale, Mahala

Fumana Khotso ea Hang-hang